Engineered Prefinished Oak Multiply Flooring made in the UK. Can have a variety of species, Oak, Ash, Douglas Fir and Walnut. Can have a wide range of colours applied. Available in Plank, Herringbone and Chevron Parquet.
Construction: Engineered Prefinished Oak Multiply Flooring
Dimensions: Depth: 20mm (5mm Wear Layer on 15mm Ply)
Lengths: 2m – 2.3m
Widths: 190mm, 220mm, 250mm & 270mm
Grades: Super Prime: Minimal colour variation no knots - 190mm only.
Prime: Minimal colour variation <10mm knots filling
Classic: Minimal colour variation <40mm knots filling
Country: Colour variation and character, large knots and
filling.
Edges: Micro bevelled on all 4 sides
Tongue & Groove on all four sides
Finish: Unfinished Sanded
Prefinished Oiled or lacquered
Moisture Content: Less than 10%
Underfloor heating: Can be installed over heated subfloor as long as you follow Reeve Instructions.
Warranty: Warranty is only structural and as long as installed to Reeve Instructions.
Environment: Reeve Floors must be installed in environment operating as follows:
Humidity: 50 – 60% RH
Temperature: 18 – 20 DegC
Sustainability: All materials are from sustainable sources.
Installation: BS8201 and Reeve Instructions.
Defect Tolerance: Grain No Limitation
Sapwood Minimal
Colour Variation No limitation
Knots No limitation, bigger knots can be filled.
Decay Not allowed.
Machining Tolerance: +/- 1.5mm on all edges and surfaces. Beware of seasonal variations.