University Hospital Sant Joan de Reus. REUS, SPAIN. Story by Picharchitects/Pich-Aguilera University Hospital Sant Joan de Reus. REUS, SPAIN. SANT JOAN DE REUS HOSPITAL Story by MARIO COREA ARQUITECTURA SANT JOAN DE REUS HOSPITAL

University Hospital Sant Joan de Reus. REUS, SPAIN.

Picharchitects/Pich-Aguilera as Architects

The new Hospital Sant Joan de Reus is conceived as an engine of expansion area of the municipality where it’s planned to generate a new technological area. This urban dimension marks its hatched definition, capable of generating routes and link flows in the city.


The building is implanted in a horizontal bar with two basements and ground floor it is situated on a comb of 6 admission bars of two floors each.


The north facade supports one of the fast access roads to the city by some cantilevered bodies that house the hospital. The focus of public service hospital, is oriented to south and is conceived as a great avenue, transitional space between the exterior and interior


The project aims to modulate the scale of a large hospital equipment, from urban scale characteristic of the access areas and public circulation until the proper scale of hospitalization, with their need for proximity and withdrawal. In this sense the public area is both functional and climatically, as if it were a covered street and the area of inpatient grouping around three landscaped courtyards, where the rooms are oriented to, trying to humanize the life of this area . The hospital is seen as a great system that organizes service subsystems. The public, medical and technical needs are ranked and connected by circulations that form a sequence that defines restrictions on the accessibility, clarifying the circuits and avoiding interferences. The architecture is also an infrastructure capable of producing directly the weather and lighting to his inner life.


The new Sant Joan Hospital is a building designed to provide a contemporary response to the hospital program, takes special care in the comfort of the patient and the staff who have to use it, and responds to the needs of eco-efficiency by decreasing energy consumption by 35% respect the average consumption of a hospital. This was achieved without using large active energy saving facilities (geothermal, solar fields, etc.) that would have further increased the levels of savings. The building has been built with a construction rate of the order of 1200 € / m2, in the lower range of prices for hospital construction.


SANT JOAN DE REUS HOSPITAL

MARIO COREA ARQUITECTURA as Architects

This project is presented according to the urban requirements of the plot and the guidelines established by the functional program. It must be taken into account that the building, due to its public use and seize, is a very important benchmark for the new technological park and the city of Reus. At the same time, we consider that the facilities are going to give an emblematic and modern image so as to achieve a high architectural quality and efficiency as new hospital.


The objective of the new hospital building project is to take the most of the site features by improving the functional program and its link between the different areas and their surroundings, and also optimizing the vehicular traffic and flow of people. All this is accomplished in the final project organization. After evaluating different alternatives, the project is presented as a major horizontal unit with light wells on which six two-storey hospitalization volumes rest as if they were floating. These volumes are linked to a large public circulation area (rambla); the slanting facade and the project of some smaller annex buildings give the hospital a more pleasant appearance along with the city, the technological park and the new university campus. The project is organized into two circulation axis or streets. The medical circulation axis, the part that is more in contact with the dual carriageway of Bellisens, is in the north part of the site where the entrances and exits of the parking lot and the technical logistics sector will be built. The public circulation axis, located in the south of the site, opens onto a new pedestrian walk. In this large circulation area, that we are going to call rambla, all public entrances to the hospital emerge from a square. The idea of this hospital design is to control its size and make it similar to the urban dimensions, controlling and balancing the landscape impact of such a building in the city.


The project consists in building a low height hospital, with changes in the existing topography, a big well-lit unit where the general public and the physicians can communicate, with green spaces, evoking nature in the building area. In the facade, where pedestrian accesses are located, the large scale building is softened with two project strategies.


On the one hand, the facade plane that covers the whole building is bent over, optically reducing the physical presence of the building and increasing its perspective effect. On the other hand, on the ground floor there are rounded pavilions at a lower scale that receive people, helping to organize the different entrances. In the big area of the public rambla, the personnel, patients and visitors encounter a public square which enters into the building as if it were part of it.

Sant Joan de Reus Hospital

Lamp as Manufacturers

The new Hospital Sant Joan de Reus, a hospital centre designed to provide a contemporary response to the hospital programme, reducing energy consumption by 35% compared with the mean consumption of a hospital, shall cover an average of 3,000 people a day and shall become a reference centre for medical oncology and radiotherapy for the whole district of Tarragona. The hospital, which has entailed an investment of around 120 million Euros, has 310 hospitalisation beds and 150 sociosanitary beds, 60 emergency boxes and 10 surgeons; with its 92,073m2 it trebles the size of the old hospital.


The New Hospital Sant Joan de Reus has been jointly designed by the architects' studios Corea & Moran and Pich-Aguilera, specialised in hospital architecture. The building, which starts the expansion of the new technological district Tecnoparc, is considered as a major horizontal unit perforated by patios of light, on which six 2-storey hospitalisation units float. These volumes are connected from west to east by way of a vertebral axis, "la Rambla", which is the space for the public circulation of the hospital centre.


Functional Organisation


As regards the circulatory structure, the architects opted for a clarity of circuits to avoid circulation interferences between health staff and the public and also to facilitate hygiene control. In terms of spatial organisation, it was decided to organise the space horizontally in line with relation and dependence criteria; and vertically in line with the most public to the most restricted. In this way, the ground floor is of a public nature and if you go up to the hospitalisation storeys the character is more restricted, or if you go down to storeys -1 and -2 access is even more restricted.


Floor +1 y +2: Hospitalisation Floor 0: Outpatient appointments, cafeteria, rehabilitation, sports medicine, drug addiction Floor -1: Emergencies, operating ward, laboratories, intensive medicine, special tests area Floor -2: Radiotherapy, oncology day hospital, maintenance and storage


Minimisation of the Landscaping Impact


To reduce as far as possible the landscaping impact, the architects undertook different actions:


-Structure of the building horizontally and inclination of the facade to minimise the visual impact with the environment. -Orientation of the building in such a way that the inclined façade with pavilions in organic forms is opposite the avenue and this is what the pedestrians perceive and, by contrast, the sequence of the 6 floating volumes are opposite the freeway. -Inclusion of large green areas on the terraces not only minimises the landscaping impact, but also improves patient comfort as a large garden space can be seen from all the rooms. What's more, from the hospitalisation units you can access 3 of these terraces which are used as gardened squares from which patients can walk in the fresh air. -Making the most of the excavation land from the same site, engendering a consequent reduction in waste transport and minimisation.


Sustainability and Energy Saving


The architects have designed a building which is integrated into the environment not only from a landscaping but also from a climatic perspective. The New Hospital de Reus has been designed as a body capable of minimising its energy needs. This is why the building has been designed as a porous volume capable of filtering inside the natural contributions of its surroundings: light, air flows, hygrometric level...


1. Efficient Construction Systems integrated into the Project


-Green Roofs. The inclusion of large green areas in the covers of the building, proposing a new concept of urban "naturalisation", aids the recovery of the natural surroundings enveloping the building. What's more, it promotes the environment as it retains the pollution particles and the air is purified, generating a favourable microclimate in the patios which improves thermodynamics. -Ventilated facade which eliminates thermal bridges and a chamber is created which optimises the thermal performance of the building in our climate. -Industrialised concrete panels and other mass concrete solutions which augment insulation and thermal inertia and improve soundproofing.


2. Water Heating and Energy Saving Systems


-Solar Photovoltaic Energy at the main façade with the production of electrical energy. -Rainwater and sewage Separation Systems which are reused for watering the gardens and facilitating their subsequent treatment. -Flow limiting taps which save water. -Avoid excessive thermal gains. In this way the ventilated façade systems combine with the arrangement of the water and vegetal substrate of the roof and an apparent thermal solar panel system capable of evacuating solar heating.


3. Climatisation Energy Saving Systems


-Heat pumps with 4 tubes instead of boilers, reducing combustion emissions and producing energetically efficient comfort. -Free-cooling and recovery of the energy of the extraction air, producing energetically efficient comfort. -Radiant false ceiling cooling/heating in the hospitalisation rooms which improve patient comfort, consume less than conventional air climatisation and avoids the use of ventilation conduits, a source for the easy transmission of germs.


4. Lighting Energy Saving Systems


-Natural Light. The main reason behind the horizontal layout of the building is the arrangement of patios and skylights which allow the whole working, appointment and hospitalisation space to have natural light, in addition to the possibility of natural ventilation in those seasons when our climate allows us to avoid using heating or air-conditioning. -Use of fluorescent luminaires equipped with high-performance electronic reactances which produce savings in consumption.


Lighting


1. Lighting in Hospitalisation Rooms - LAMP SOLUTION: CLINIC


Under the premises of functionality and efficiency, Corea & Moran have opted to light up the hospitalization rooms with CLINIC luminaire. The more pleasant the surroundings, the faster patients recover. It is therefore very important for the lighting of hospital rooms to be suitable. Direct lighting causes glare, visual fatigue and stress; whereas indirect lighting prevents glare and creates more comfortable contrasts. The light fixtures used in such rooms must be designed with a neutral, unaggressive appearance while, at the same time, being functional. The lighting system used, being undoubtedly the most complete, is the headboard system:


-Direct lighting: the patient must not be exposed to a luminance of over 750 cd/m2 and the lighting must have a direct glare control. -Indirect lighting: 100 lux on the floor and 200 lux on walls and ceiling. -Reading light: 300 lux. Must be accessible and easy to control. -Examination and/or treatment lighting: 800-1000 lux minimum. -Night lights: 5 lux. -Light sources should have warm color temperatures. -The lighting should be dimmable, giving greater comfort to the patient while helping to save energy. -It is important to make use of natural light.


To meet most of the aforementioned requirements, the new range of CLINIC headboards, specifically designed for hospitals, elderly people's homes, clinics and health centres, is characterized by its neutral lines and timeless, minimalist design, making the light fixture itself "disappear" from the room and giving the lead role to the light. Made from white lacquered extruded aluminium, it provides direct and/or indirect lighting, and can be customized by choosing the light source and adding the necessary mechanisms (switch, telephone socket, call button, surveillance light, etc.). For the Hospital de Sant Joan de Reusa a special CLINIC luminaire has been designed with three gas sockets built in, mechanisms and sources of light T5-24W (direct lighting) and T5-54W (indirect lighting).


2. Interior Lighting of Halls and Exterior Lighting of Façade - LAMP SOLUTION: PROA


For lighting of the hall, better known as "La Rambla", as well as the exterior lighting of the façade, the architects have gone for the PROA luminaire by LAMP. Made of injected aluminium, lacquered in grey texturised polyester with an IP65 protection index making it very resistant to bad weather, this luminaire is ideal for lighting up façades, spaces of great height and domed ceilings. This Project made use of 35 direct radiation models with asymmetric optics for HIT-DE 150W lamps and two power level equipment which allows a reduction in lighting levels at night.


3. Exterior Lighting Avenida - LAMP SOLUTION: B-SIDE LED


As regards the Exterior Lighting of the hospital centre, the architects opted to light up each exterior space with: "The Right Light". Specifically designed for LED light sources which allow low consumption and minimum maintenance thanks to the 50,000 hours of working life of the LED, the architects opted to light up the Avenue and the access areas of the façade with 200 B-SIDE LED 2'4W, 135mm high bollards. Made of injected and extruded aluminium, lacquered in grey texturised polyester, with corrosion-proofing Alodine 1200 at their base and with protection indices IP65 and IK10, B-SIDE LED is an excellent vandal-proof solution for lighting up public parks, gardens and different urban areas. What's more, it serves as a signpost marking thanks to its self lighting, thus becoming a structuring element of the space.


4. Exterior Lighting Ring Roads - LAMP SOLUTION: SHOT


By contrast, owing to their technical performance and sturdy design, 14 SHOT 380 projectors with spot optics for HIT 150W lamps, IP65 and IK09 were selected for lighting up the 6 floating volumes at the back of the building. Made of injected aluminium, lacquered in grey texturised polyester, their main body incorporates cooling fins as well as a hinged cover with a dual seal to facilitate installation and maintenance.


5. Exterior Lighting Car Park - LAMP SOLUTION: MINI PROA ROAD SYSTEM


Finally, it was decided to opt for the MINI PROA ROAD SYSTEM to light up the car park for health staff. 12 Mini Proas were chosen for this Project with asymmetric optics for a 70W HIT/HST lamp with IP65 and two power level equipment, installed with a final double arm cut into six 6 m high troncoconic columns.

Hospital Sant Juan de Reus

Rieder Sales GmbH as Manufacturers

Product Information: 5.200 m2 fibreC ivory


Surface: Ferro

Product Spec Sheet

ElementBrand
Blinds, Curtains and Shades ManufacturerBandalux
ManufacturersRieder Sales GmbH
ManufacturersLamp
ManufacturersTroll
Product Spec Sheet
Blinds, Curtains and Shades Manufacturer
B-Box System Roller Shades by Bandalux
Manufacturers
Manufacturers
by Lamp
Manufacturers
by Troll
Project Spotlight
Product Spotlight
News
Detail: sliding panels of natural pine protect a residential complex from the Mallorcan sun
29 Mar 2024 Detail
Detail: sliding panels of natural pine protect a residential complex from the Mallorcan sun

Spanish architecture firm OHLAB has recently completed Paseo de Mallorca 15, a residential complex o... More

Snøhetta designs new extension for the world’s oldest ski museum in Oslo
28 Mar 2024 News
Snøhetta designs new extension for the world’s oldest ski museum in Oslo

Global transdisciplinary architecture and design practice Snøhetta has designed a new entranc... More

10 public buildings that demonstrate architectural applications of precast concrete
27 Mar 2024 Specification
10 public buildings that demonstrate architectural applications of precast concrete

Precast concrete is made by casting concrete in a reusable mold. These molds are made of various mat... More

Sameep Padora and Associates creates a flowing, organic art center in southern India
26 Mar 2024 News
Sameep Padora & Associates creates a flowing, organic art center in southern India

Mumbai-based Sameep Padora & Associates (sP+a) has completed Hampi Art Labs in Toranagallu, a vi... More

Introducing Partner Thermory AS
26 Mar 2024 Partner News
Introducing Partner Thermory AS

Thermory AS offers a diverse product range that includes durable exterior cladding, decking, interio... More

Brooklyn Tower by ShOP Architects showcases a unique materiality
25 Mar 2024 News
Brooklyn Tower by ShOP Architects showcases a unique materiality

Brooklyn Tower, standing an impressive ninety-three stories tall with a unique neo-deco crown, is al... More

Doriana Fuksas, Martin Lesjak, Li Xiang and Steven Wright join Archello Awards 2024 jury
25 Mar 2024 Archello Awards
Doriana Fuksas, Martin Lesjak, Li Xiang and Steven Wright join Archello Awards 2024 jury

Doriana Fuksas, Martin Lesjak, Li Xiang and Steven Wright have been announced as Archello Awards 202... More

Vurpas Architectes converts former brick and concrete market into light-filled primary school in Lyon
22 Mar 2024 News
Vurpas Architectes converts former brick and concrete market into light-filled primary school in Lyon

The Eugénie Brazier school project in Lyon, France, undertaken by regional architecture studi... More