Installation of TwinFresh single-room reversible ventilators with energy regeneration is the most state-of-the-art and practical way to arrange a comfortable microclimate and the required air exchange in refurbished premises, brand new recently inhabited houses or reconstructed apartments.
Cost-saving The TwinFresh single room ventilators are the ready ventilation units that provide supply of fresh air to the premise, its filtration and extract of polluted air outside. You do not need to purchase some extra ventilation equipment or its components to create efficient ventilation system. Installation of a pair of TwinFresh ventilators is an efficient full-fledged ventilation system of your premise!
Energy-saving The great advantage of the TwinFresh ventilators is their ability to regenerate heat and humidity balance in the premises due to use of a special ceramic thermal accumulator (energy regenerator). Energy regeneration is based on use of the heat and humidity of the removed polluted air from the premise for heating and moisturizing of intake fresh air from outside. In view of permanent heat losses in the room use of the heat utilization is the most useful technology for cost and energy saving.
Highly efficient The heat regeneration rate of the TwinFresh single room ventilators is very high and reaches 91%. Meanwhile one TwinFresh unit provides permanent balanced air exchange and air filtration required for ventilation of the area up to 50 m2. The best result is achieved by using the TwinFresh ventilators in the same room in pairs for creation of the most comfortable microclimate.
Versatile The TwinFresh single room ventilators are applicable at any project stage and suitable for any room, starting from design of the ventilation system during construction of a new object, including reconstruction of existing buildings and premises, ordinary scheduled repair and finishing with ready-made premises, where installation of centralized ventilation devices is unfeasible. The ventilators have user-friendly design depending on application area, e.g. the TwinFresh S model with a square telescopic duct is normally used for facilities under construction whereas the TwinFresh R modes with a round telescopic duct is used for ready-built or reconstructed buildings.
Simple and easy to use The TwinFresh compact ventilators do not require any extra components or air ducts. They are ready for use. The ventilators are designed for through-the-wall installation to the outer wall of the buildings. The only thing you need is a through opening in the wall, which is closed with a decorative ventilation grille matching any interior design. The outer side is covered with an outer hood for prevention of direct penetration of water and foreign objects into the ventilator.
The efficient, reliable, energy-saving and cost-efficient TwinFresh ventilators work round the clock to: - supply clean fresh air to the premises - remove stale extract air from the premise - clean the air from dust and insects - prevent penetration of excessive humidity and appearance of mould - protect against outdoor noise - regenerate heat and provide humidity balance inside - reduce the heating costs in winter and air conditioning costs in summer - require low energy demand
Parameter Speed 3 Voltage 100-230 V Phase 1˜ Power 3.8 / 5.61 W Current 0.024 / 0.039 A Frequency 50/60 Hz Maximum air capacity 14 / 54 m³/h Sound pressure level at 1 m 22 / 32 [dBA] Sound pressure level at 3 m 13 / 23 [dBA] Regenerating efficiency up to 90% Regenerator type Ceramic Air duct size Ø150 mm Protection rating IP 24 class
