Epoxy Wet Laminating System
¬ Optimised for open-mould laminating of large structures ¬ Germanischer Lloyd & Lloyds approved ¬ Mix ratio of 100:28 (by weight)
INTRODUCTION Ampreg 22 is an established and widely used laminating system. It is intended for both wet lay-up and vacuum bagging processes. The long working time and low exotherm of Ampreg 22 make it ideal for manufacturing large, high performance composite structures. Ampreg 22 is both Germanischer Lloyds and Lloyds approved for certified applications. The Ampreg 22 system consists of a resin and a choice of five hardeners to provide a complete range of working properties. With its Extra Slow Hardener, Ampreg 22 can provide laminate working times of over 9 hours at 20ºC / 70ºF whilst having low exothermic reactions even when used in thick sections. The Fast hardener has such rapid through-cure at 25-30ºC / 75-85ºF that it can be used to produce small mouldings that are de-mouldable in just a few hours.
TYPICAL APPLICATIONS Ideally suited to large structures such as boat hulls, buildings and wind turbine blades.
