White Hills Stones

WHY FACING STONE? Among the various options for facades and walls decorating, stone and brick veneer have a lot of advantages when compared to other materials. All White Hills facing stones and bricks are made from high-quality raw materials and are applicable in interior and exterior design. Our stones are highly weather and frost resistant. Moreover, they do not become faded due to UV-resistance. With White Hills facing stones and bricks the decorated facades always maintain the same look for decades to come, without elements falling out and color fading. They also do not need to be renovated in the course of their service life. Highly resistant concrete materials protect the building’s facade especially its plinth or other exposed surfaces. Facing stones and bricks are lighter than natural stone and can be quickly installed on almost all kinds of surfaces. Compared with massive walls made of natural stone or other brickwork when carrying out stone veneer works there is no requirement for reinforced foundation or wall anchors, which is cost- and time-saving. Facing stone and bricks are available in more color options than natural stones. Their matt colors look more elegant than uneven crystal-glossy surfaces of natural stone elements. The porous surface of the facing stones enables to perform deep hydrophobization, which is water and stain repellent, which in turn makes the facade last for years. Natural stones can only be protected on the surface and usually need annual impregnation. All White Hills facing stones and bricks are produced from concrete and are solid building material. They function as thermal storage for the building. The elements of the facade cool down slowly so that no condensate builds up and therefore no moss or algae appears. In the interior area our facing stones enable to economize on the energy costs thanks to its warmth-saving effect (in winter the faced walls are cooled down only superficially, less heating will be needed to raise the temperature to a warmer grade again). In interior design the excessive humidity is absorbed by our stones and bricks and then gradually released improving the room’s inner climate. The walls faced with decorative stone have a structured surface and provide better acoustics for the rooms, compared to walls with flat textures. QUALITY/WARRANTY We are proud of our products and stand up to the quality standards of our clients. White Hills facing stones and bricks are produced from high quality materials. Our stones production is a 14-day process with on-going quality control. Only this way allows us to be confident when providing a 12-year warranty on our products. The proved quality gives security that is why our facing stones and bricks have passed various TÜV tests. You can find the respective certificates in our Download section. To make our facades and facing walls look natural we use many different stone elements in each collection. That is why one cannot find two identical stones on the faced surface of 5m2. Only with suitable installation materials, perfectly prepared facing base and correct installation the durability of the result can be achieved. We offer all the necessary materials for the installation process: from grounding, glue, joint mortar to hydrophobization and cleaning materials that all correspond to the high requirements of our products assembly. The file with the described norms of material takeoff, assembly steps and facing base preparation instruction can be found in our Download section. In our showroom, where more than 200 different facing stones and bricks are presented, one can receive professional and individual consultation.